孙文权
过程控制部部长
研究员、硕士生导师
办公地点: 北京科技大学昌平创新园南楼505
办公电话: 010-62332598 传真: 010-62332947
电子邮件: wqsun18@163.com
科研方向
（1）大型装备热、力、电磁多场耦合建模研究；
（2）板带产品多工序质量控制，冷轧产品板形及质量控制；
（3）大型装备过程建模及控制理论；
（4）冷轧全流程质量智慧控制技术；
（5）钢铁工业生产智能化发展及智能工厂建设应用；
（6）加热炉智能燃烧控制系统;
（7）大数据智能工艺模型及控制；
（2）板带产品多工序质量控制，冷轧产品板形及质量控制；
（3）大型装备过程建模及控制理论；
（4）冷轧全流程质量智慧控制技术；
（5）钢铁工业生产智能化发展及智能工厂建设应用；
（6）加热炉智能燃烧控制系统;
（7）大数据智能工艺模型及控制；
社会职务
《轧钢》杂志编委
《钢铁》杂志青年编委
《钢铁研究学报》杂志青年编委
《Journal of Iron and Steel Research , International》杂志青年编委
《钢铁》杂志青年编委
《钢铁研究学报》杂志青年编委
《Journal of Iron and Steel Research , International》杂志青年编委
简历
2001.09 – 2005.07 北京科技大学 学士学位
2005.09 – 2010.04 北京科技大学 博士学位
2010.04 – 2012.07 北京科技大学 博士后
2012.07 – 2016.06 北京科技大学 高效轧制国家工程研究中心，助理研究员
2016.06 – 2017.01 加拿大麦克马斯特大学先进控制技术研究中心，访问学者
2017.01 – 2017.07 北京科技大学工程技术研究院，助理研究员
2017.07 – 2024.07北京科技大学工程技术研究院过程控制研究所所长 副研究员，硕士生导师
2024.07 – 今 北京科技大学工程技术研究院过程控制部部长 研究员，硕士生导师
2005.09 – 2010.04 北京科技大学 博士学位
2010.04 – 2012.07 北京科技大学 博士后
2012.07 – 2016.06 北京科技大学 高效轧制国家工程研究中心，助理研究员
2016.06 – 2017.01 加拿大麦克马斯特大学先进控制技术研究中心，访问学者
2017.01 – 2017.07 北京科技大学工程技术研究院，助理研究员
2017.07 – 2024.07北京科技大学工程技术研究院过程控制研究所所长 副研究员，硕士生导师
2024.07 – 今 北京科技大学工程技术研究院过程控制部部长 研究员，硕士生导师
代表性著作
专著：
Sun Wenquan, Yang Tingsong, He Anrui, Liu Chao.Formation Mechanism and High Precision Continuous Rolling Control Technologyof Wide-with and Thingauge Cold Rolled Strip，Metallurgical Industry Press，2024.03
论文：
(1)Wenquan Sun*, Shengyi Yong, Tieheng Yuan, et al. Mechanism and control of nonuniform phase transformation of microalloyed dual-phase steel during cooling process after hot rolling. J. Iron Steel Res. Int, 2024, 31: 428-441. (中科院2区, TOP, JCR Q2,IF 2.5).
(2)Wenquan Sun*, Shengyi Yong, Tieheng Yuan, et al. Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel. J. Iron Steel Res. Int, 2024, 31: 688–699. (中科院2区, TOP, JCR Q2,IF 2.5).
(3)Tianlun Li, Wenquan Sun*, Anrui He, et al. A defect recognition model for cross-section profile of hot-rolled strip based on deep learning. J. Iron Steel Res. Int, 2023, 30: 2436–2447. (中科院2区, TOP, JCR Q2,IF 2.5).
(4)Tieheng Yuan, Wenquan Sun*, Simeng Chen. Fatigue-Damage Prediction Model of Backup Roll of Hot Strip Mills and its Applications. J Fail. Anal. and Preven. 2023, 23: 880–893.(EI).
(5)Wenquan Sun*, Luzhen Chen, Anrui He, et al. Study on quarter-wave control of DP980 steel based on a bending force linear combination strategy. Int J Adv Manuf Technol, 2023, 127: 2881–2892. (中科院3区,JCR Q3,IF 3.4).
(6)Wenquan Sun*, Tieheng Yuan, Zhangyu Wu, et al. Optimization Model of the Cold Rolling Roll Grinding Volume Based on Nonlinear Fatigue Accumulation Regulation. J Fail. Anal. and Preven, 2023, 23: 2131–2141.( EI).
(7) Wenquan Sun, Ting-song YANG, An-Rui HE, Chao LIU, Jian SHAO. . Formation Mechanism and High Precision Continuous Rolling Control Technologyof Wide-with and Thingauge Cold Rolled Strip, 2023, ISBN: 978-7-5024-9698-2.
(8)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Research on Thickness Defect Control of Strip Head Based on GA-BP Rolling Force Preset Model. METALS, 2022, 12(6): 924. (中科院3区,JCR Q3,IF 2.9).
Wenquan Sun*, Anrui He, Chao Liu, et al. Analytical Study on Longitudinal Buckling Deformation Behavior of Wide-width and Thin-size Hot Rolled Strip. Journal of Mechanical Engineering, 2022, 58(14): 203-211. (机械学科TOP, EI) .
(9)Tieheng Yuan, Wenquan Sun*, Anrui He, et al. Research on quarter wave shape control of cold rolled high strength steel based on BP-MOPSO. Int J Adv Manuf Technol, 2022, 122: 3867–3880. (中科院3区,JCR Q3,IF 3.4).
(10)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Research on quarter-wave control in DP980 steel during cold rolling based on multi-pass simulation. Int J Adv Manuf Technol, 2022, 123: 83–98. (中科院3区,JCR Q3,IF 3.4).
(11)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Study on quarter-wave generation mechanism in DP980 steel during cold rolling. Int J Adv Manuf Technol, 2022, 120: 313-327. (中科院3区,JCR Q3,IF 3.4).
(12)施剑睿,孙文权*,陈禄祯,等. 基于极限静摩擦力矩的轧机打滑预测模型.钢铁, 2021, 56(09):96-101. (中文核心).
(13)于海军,何安瑞,孙文权*,等. 薄宽带材局部纵向屈曲的辛弹性力学求解方法.固体力学学报, 2021, 42(05):576-585. (中文核心).
(14)Sun Wenquan , Zhang Xiyang, He Anrui, Liu Dongye. Research on Local Buckling of High Accuracy Cold Rolled Thin Strip at Local High Point in Coiling Process [J]. La Metallurgia Italiana. 2016, 1.
(15)孙文权，郝溥俊，邵健，何安瑞. 基于数值分析和预测控制的宽幅冷轧带材平坦度闭环控制策略及应用研究[J].工程学学报，2016, 38(1):10-14.
(16)Wenquan Sun, Jian Shao, Anrui He, Haishan Zhao, and Jie Zhou. RESEARCH ON RESIDUAL STRESS QUANTITATIVE REDUCTION IN LAMINAR COOLING ON HOT STRIP MILL [J]. International Journal of Heat and Technology. 2015, 33(4):19-24.
(17)Wenquan Sun, Jian Shao, Anrui He, Pujun Hao. Research on Distribution of Residual Stresses of Cold Rolled Sheet Distorted Area Based on ANSYS [J]. MANUFACTURING TECHNOLOGY, 2015, 15(1):22-29
(18)孙文权，何安瑞，邵健，张飞，智建伟. 高精度冷轧板带质量改进新技术研究与实践, 冶金自动化, , 2015,39(3):8-12
(19)Wenquan Sun, Jian Shao, Anrui He, Performance Optimization of Artifcial Metabolic Algorithm on Rolling Automation Control[J], Journal of Computational Information Systems,2014, v10(20), p 8715-8722
(20)Wenquan Sun, Jian Shao, Anrui He,Quan Yang. The Application Development of Coiling Eccentricity Control Based on Wavelet Transform [J]. The Open Automation and Control Systems Journal, 2014, 6:1310-1316.
(21)Wenquan Sun, Jian Shao, Anrui He. Coiling eccentricity compensation control system based on BP Neural Network Algorithm[C], 2011 International Conference on Electronics, Communications and Control, ICECC 2011 - Proceedings, p 1945-1950, 2011
(22)SUN Wen-quan, YANG Quan， SHAO Jian， SUN Hao. Research on High Precision Profile Control Technique of Silicon Steel for UCM Tandem Cold Rolling Mill[C] , 2010 International Conference on Mechanic Automation and Control Engineering, MACE2010, 5926-5929
(23)孙文权，杨荃，邵健等. UCM冷连轧机硅钢边降控制技术研究[J], 北京科技大学学报, 2010，32(10)：1340-1345.
(24)Wenquan Sun, Quan Yang，Anrui He ,Xinyu Guo. Research of the Strategy on the Flatness and Gauge Control Based on Coiling Variable Tension Control Process[J], Advanced Materials Research, 2013,v572(376): 98-103,
(25)孙文权，杨荃，何安瑞，郭新宇. 冷连轧板形板厚耦合关系及其解耦设计研究[J], 钢铁,2012,47(6): 46-50(26)孙文权，杨荃，邵健，何安瑞. 单机架冷轧机全干扰耦合模型的分步解耦设计[J], 钢铁研究学报, 2010,22(8):8-12
(27)孙文权，杨荃. 单机架冷轧机全干扰耦合模型的建立与分析[J], 钢铁,2010,45(1): 18-24
孙文权，杨荃，鹏鹏，王晓晨，刘天武. 全连续冷连轧机张力控制系统[J], 冶金自动化,2009,33(3):20-25)
Sun Wenquan, Yang Tingsong, He Anrui, Liu Chao.Formation Mechanism and High Precision Continuous Rolling Control Technologyof Wide-with and Thingauge Cold Rolled Strip，Metallurgical Industry Press，2024.03
论文：
(1)Wenquan Sun*, Shengyi Yong, Tieheng Yuan, et al. Mechanism and control of nonuniform phase transformation of microalloyed dual-phase steel during cooling process after hot rolling. J. Iron Steel Res. Int, 2024, 31: 428-441. (中科院2区, TOP, JCR Q2,IF 2.5).
(2)Wenquan Sun*, Shengyi Yong, Tieheng Yuan, et al. Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel. J. Iron Steel Res. Int, 2024, 31: 688–699. (中科院2区, TOP, JCR Q2,IF 2.5).
(3)Tianlun Li, Wenquan Sun*, Anrui He, et al. A defect recognition model for cross-section profile of hot-rolled strip based on deep learning. J. Iron Steel Res. Int, 2023, 30: 2436–2447. (中科院2区, TOP, JCR Q2,IF 2.5).
(4)Tieheng Yuan, Wenquan Sun*, Simeng Chen. Fatigue-Damage Prediction Model of Backup Roll of Hot Strip Mills and its Applications. J Fail. Anal. and Preven. 2023, 23: 880–893.(EI).
(5)Wenquan Sun*, Luzhen Chen, Anrui He, et al. Study on quarter-wave control of DP980 steel based on a bending force linear combination strategy. Int J Adv Manuf Technol, 2023, 127: 2881–2892. (中科院3区,JCR Q3,IF 3.4).
(6)Wenquan Sun*, Tieheng Yuan, Zhangyu Wu, et al. Optimization Model of the Cold Rolling Roll Grinding Volume Based on Nonlinear Fatigue Accumulation Regulation. J Fail. Anal. and Preven, 2023, 23: 2131–2141.( EI).
(7) Wenquan Sun, Ting-song YANG, An-Rui HE, Chao LIU, Jian SHAO. . Formation Mechanism and High Precision Continuous Rolling Control Technologyof Wide-with and Thingauge Cold Rolled Strip, 2023, ISBN: 978-7-5024-9698-2.
(8)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Research on Thickness Defect Control of Strip Head Based on GA-BP Rolling Force Preset Model. METALS, 2022, 12(6): 924. (中科院3区,JCR Q3,IF 2.9).
Wenquan Sun*, Anrui He, Chao Liu, et al. Analytical Study on Longitudinal Buckling Deformation Behavior of Wide-width and Thin-size Hot Rolled Strip. Journal of Mechanical Engineering, 2022, 58(14): 203-211. (机械学科TOP, EI) .
(9)Tieheng Yuan, Wenquan Sun*, Anrui He, et al. Research on quarter wave shape control of cold rolled high strength steel based on BP-MOPSO. Int J Adv Manuf Technol, 2022, 122: 3867–3880. (中科院3区,JCR Q3,IF 3.4).
(10)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Research on quarter-wave control in DP980 steel during cold rolling based on multi-pass simulation. Int J Adv Manuf Technol, 2022, 123: 83–98. (中科院3区,JCR Q3,IF 3.4).
(11)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Study on quarter-wave generation mechanism in DP980 steel during cold rolling. Int J Adv Manuf Technol, 2022, 120: 313-327. (中科院3区,JCR Q3,IF 3.4).
(12)施剑睿,孙文权*,陈禄祯,等. 基于极限静摩擦力矩的轧机打滑预测模型.钢铁, 2021, 56(09):96-101. (中文核心).
(13)于海军,何安瑞,孙文权*,等. 薄宽带材局部纵向屈曲的辛弹性力学求解方法.固体力学学报, 2021, 42(05):576-585. (中文核心).
(14)Sun Wenquan , Zhang Xiyang, He Anrui, Liu Dongye. Research on Local Buckling of High Accuracy Cold Rolled Thin Strip at Local High Point in Coiling Process [J]. La Metallurgia Italiana. 2016, 1.
(15)孙文权，郝溥俊，邵健，何安瑞. 基于数值分析和预测控制的宽幅冷轧带材平坦度闭环控制策略及应用研究[J].工程学学报，2016, 38(1):10-14.
(16)Wenquan Sun, Jian Shao, Anrui He, Haishan Zhao, and Jie Zhou. RESEARCH ON RESIDUAL STRESS QUANTITATIVE REDUCTION IN LAMINAR COOLING ON HOT STRIP MILL [J]. International Journal of Heat and Technology. 2015, 33(4):19-24.
(17)Wenquan Sun, Jian Shao, Anrui He, Pujun Hao. Research on Distribution of Residual Stresses of Cold Rolled Sheet Distorted Area Based on ANSYS [J]. MANUFACTURING TECHNOLOGY, 2015, 15(1):22-29
(18)孙文权，何安瑞，邵健，张飞，智建伟. 高精度冷轧板带质量改进新技术研究与实践, 冶金自动化, , 2015,39(3):8-12
(19)Wenquan Sun, Jian Shao, Anrui He, Performance Optimization of Artifcial Metabolic Algorithm on Rolling Automation Control[J], Journal of Computational Information Systems,2014, v10(20), p 8715-8722
(20)Wenquan Sun, Jian Shao, Anrui He,Quan Yang. The Application Development of Coiling Eccentricity Control Based on Wavelet Transform [J]. The Open Automation and Control Systems Journal, 2014, 6:1310-1316.
(21)Wenquan Sun, Jian Shao, Anrui He. Coiling eccentricity compensation control system based on BP Neural Network Algorithm[C], 2011 International Conference on Electronics, Communications and Control, ICECC 2011 - Proceedings, p 1945-1950, 2011
(22)SUN Wen-quan, YANG Quan， SHAO Jian， SUN Hao. Research on High Precision Profile Control Technique of Silicon Steel for UCM Tandem Cold Rolling Mill[C] , 2010 International Conference on Mechanic Automation and Control Engineering, MACE2010, 5926-5929
(23)孙文权，杨荃，邵健等. UCM冷连轧机硅钢边降控制技术研究[J], 北京科技大学学报, 2010，32(10)：1340-1345.
(24)Wenquan Sun, Quan Yang，Anrui He ,Xinyu Guo. Research of the Strategy on the Flatness and Gauge Control Based on Coiling Variable Tension Control Process[J], Advanced Materials Research, 2013,v572(376): 98-103,
(25)孙文权，杨荃，何安瑞，郭新宇. 冷连轧板形板厚耦合关系及其解耦设计研究[J], 钢铁,2012,47(6): 46-50(26)孙文权，杨荃，邵健，何安瑞. 单机架冷轧机全干扰耦合模型的分步解耦设计[J], 钢铁研究学报, 2010,22(8):8-12
(27)孙文权，杨荃. 单机架冷轧机全干扰耦合模型的建立与分析[J], 钢铁,2010,45(1): 18-24
孙文权，杨荃，鹏鹏，王晓晨，刘天武. 全连续冷连轧机张力控制系统[J], 冶金自动化,2009,33(3):20-25)
获奖
[1]高精度冷连轧数字孪生与信息物理系统(CPS)关键技术研发及应用，冶金科学技术进步奖，一等奖， 2023
[2]面向高品质薄规格轧制的薄板坯连铸轧制过程控制关键技术及应用，安徽省科学技术奖，二等奖， 2023
[3]宽带钢热连轧智能化过程控制关键技术及应用，高等学校科学研究优秀成果奖（科学技术） 二等奖，2023
[4]第九届中国国际“ 互联网+” 大学生创新创业大赛北京赛区高教主赛道，学科竞赛优秀指导教师 二等奖，2023
[5]钢轧过程产品质量智能管控技术与平台，冶金科学技术进步奖，一等奖， 2021
[6]面向多品规高精度轧制的CSP过程控制系统关键技术，冶金科学技术进步奖，一等奖，2020
[7]罐车用大规格铝合金板材短流程制备技术集成开发与应用，广西科学技术进步奖，二等奖， 2019
[8]宽幅铝板带热连轧成套控制系统和关键工艺技术研发及应用，有色金属协会科学技术进步奖，一等奖，2017
[9]交通运输用超宽幅高性能铝板带1+4热连轧生产集成技术的自主创新与产业化，广西科学技术进步奖，二等奖， 2017
[2]面向高品质薄规格轧制的薄板坯连铸轧制过程控制关键技术及应用，安徽省科学技术奖，二等奖， 2023
[3]宽带钢热连轧智能化过程控制关键技术及应用，高等学校科学研究优秀成果奖（科学技术） 二等奖，2023
[4]第九届中国国际“ 互联网+” 大学生创新创业大赛北京赛区高教主赛道，学科竞赛优秀指导教师 二等奖，2023
[5]钢轧过程产品质量智能管控技术与平台，冶金科学技术进步奖，一等奖， 2021
[6]面向多品规高精度轧制的CSP过程控制系统关键技术，冶金科学技术进步奖，一等奖，2020
[7]罐车用大规格铝合金板材短流程制备技术集成开发与应用，广西科学技术进步奖，二等奖， 2019
[8]宽幅铝板带热连轧成套控制系统和关键工艺技术研发及应用，有色金属协会科学技术进步奖，一等奖，2017
[9]交通运输用超宽幅高性能铝板带1+4热连轧生产集成技术的自主创新与产业化，广西科学技术进步奖，二等奖， 2017
专利
获得授权国家发明专利40余项
科研项目
作为负责人，主持与参加国家、省部级纵向项目15项，包括国家科技支撑计划、863计划等。负责企业横向项目超过50项。