米振莉
北京科技大学工程技术研究院 副院长
高效轧制国家工程研究中心 副主任
研究员、博士生导师
办公地点: 北京科技大学昌平创新园南楼213
办公电话: 62332598-6609 传真: 62332947
电子邮件: mizl@nercar.ustb.edu.cn
科研方向
钢材品种开发及性能优化
金属材料深加工（成形、焊接、涂镀）技术
汽车用钢轻量化技术及服役性能研究
基于材料基因工程的材料设计新技术新方法
金属材料深加工（成形、焊接、涂镀）技术
汽车用钢轻量化技术及服役性能研究
基于材料基因工程的材料设计新技术新方法
社会职务
中国金属学会金属材料深度加工分会委员兼秘书长
中国汽车工程学会理事
中国汽车工程学会理事
简历
1990.09 – 1994.07 北京科技大学 学士学位
1998.09 – 2001.04 北京科技大学 硕士学位
2003.09 – 2007.04 北京科技大学 博士学位
2016.11 – 2017.05 美国罗格斯大学 高级访问学者
1994至今任职于北京科技大学，研究员，博士生导师
1998.09 – 2001.04 北京科技大学 硕士学位
2003.09 – 2007.04 北京科技大学 博士学位
2016.11 – 2017.05 美国罗格斯大学 高级访问学者
1994至今任职于北京科技大学，研究员，博士生导师
代表性著作
1. Yang, Y, Mi, Z, Jiang, H, et al. Effects of the austenitizing temperature on the microstructure and mechanical properties in multiple-phase medium Mn steel. Materials Research Express, 2020, 6(12), 1265c9.
2. Zhou D, Xu M, Mi Z. Energy Absorption Mechanism of High-Strength Q&P and DP Steel Thin-Walled Structures[J]. Transactions of the Indian Institute of Metals, 2020, 73(7): 1999-2006.
3. Zhou D, Li M, Mi Z, et al. Investigation of Selective Oxidation and Reaction Wetting of Q&P Steel Under Different Dew Point During Continuous Galvanizing[J]. Transactions of the Indian Institute of Metals, 1-8.
4. Zhou D, Li M, Mi Z, et al. Insight into the law and mechanism of selective oxidation of Q&P steel under different annealing parameters[J]. Materials Research Express, 2020, 7(10): 106524.
5. Duan X, Jiang H, Mi Z, et al. Reduce the Planar Anisotropy of AA6016 Aluminum Sheets by Texture and Microstructure Control[J]. Crystals, 2020, 10(11): 1027.
6. Wang J, Mi Z, Jiang H, et al. Texture-governed electrochemical corrosion behaviour of AA 6082 alloy[J]. Journal of Materials Science, 2019, 54(8): 6608-6623.
7. Wang J Y, Jiang H T, Duan X G, Lin H T, Qiu P, Mi Z L. Orientation and microstructure topology governed crack propagation behavior in AA7021 aluminum alloys during uniaxial tension[J]. Materials Science and Engineering: A, 2019, 739: 254-263.
8. Duan X, Mi Z, Jiang H, et al. Rapid bake-hardening response of Al-Mg-Si alloy during two-stage pre-aging heat treatment[J]. Materials Research Express, 2019.
9. Xu M, Li H, Jiang R, Jiang H, Mi Z. Deformation behavior and microstructural evolution in ultra-high-strength dual-phase (UHS-DP1000) steel with different strain rates[J]. Journal of Iron and Steel Research International, 2019, 26(2): 173-181.
10. Yu Z C, Mi Z L, Guo J, et al. Studying inhomogeneous deformation of bainite-retained austenite steel during cold drawing[J]. Materials Research Express, 2018, 5(9): 096518.
11. Yang Y G, Mi Z L, Xu M, et al. Impact of intercritical annealing temperature and strain state on mechanical stability of retained austenite in medium Mn steel[J]. Materials Science and Engineering: A, 2018, 725: 389-397.
12. Yang Y G, Mi Z L, Xu M, Jiang H T, Xiu Q. Bending deformation and fracture characterisation in quenching and partitioning steel[J]. Materials Science and Technology, 2018: 1-9.
13. Yang Y, Mi Z, Liu S, et al. The Impact of Strain Heterogeneity and Transformation of Metastable Austenite on Springback Behavior in Quenching and Partitioning Steel[J]. Metals, 2018, 8(6): 432.
14. Yang Y G, Mi Z L, Li H, Xu Mei, Jiang R T. Effects of Shear Strain on Orientation Gradients, the Instability of Austenite Diffraction Peak, and Microstructure in Twinning-Induced Plasticity (TWIP) Steels[J]. Steel research international, 2018,89(2):1-8.
15. Xu M, Mi Z L, Li H, Tang D, Jiang H T. Deformation mechanism transition in Fe–17Mn–0.4 C–0.06 V TWIP steel with different strain rates[J]. Materials Science and Technology, 2018,34(2):242-251.
16. Li L, Mi Z L, Wang Z, et al. Modified quenching temperature selection method for partial austenitization quenching and partitioning steel[J]. Materials Research Express, 2018, 5(6): 066553.
17. Yu Z C, Mi Z L, Cai Q W, et al. Effect of Final Rapid Cooling Temperature on Ultra-Fine Carbides of Ti-Mo Ferrite Matrix Microalloyed Steel[C]//Materials Science Forum. Trans Tech Publications, 2018, 926: 3-10.
18. Li H, Xu M, Li Z, Jiang R, Jiang H, Li L, Mi Z. Hot deformation behaviour and processing map of a typical Fe-Mn-Si-Cr steel for automotive body structures[J]. Ironmaking & Steelmaking, 2018, 45(10): 937-943.
19. Li H, Xu M, Li Z T, Jiang R T, Jiang H T, Li Long, Mi Z L. Hot deformation behaviour and processing map of a typical Fe-Mn-Si-Cr steel for automotive body structures[J]. Ironmaking & Steelmaking, 2017: 1-7.
20. Xu M, Yang Y G, Chen J Y, Tang D, Jiang H T, Mi Z L. Effects of strain states on stability of retained austenite in medium Mn steels[J]. Journal of Iron and Steel Research, International, 2017, 24(11): 1125-1130.
21. Li Hui, Mi Zhenli, Zhang Xiaolei, Tang Di, Wang Yide. Carbide Dissolution during Intercritical Austenitization in Bearing Steel[J]. Journal of Wuhan University of Technology(Materials Science Edition),2014,06:1242-1245.
22. Yujie Wei；Yongqiang Li；Lianchun Zhu；Yao Liu；Xianqi Lei；Gang Wang；Yanxin Wu；Zhenli Mi；Jiabin Liu；Hongtao Wang；Huajian Gao； Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins；Nature Communications volume 5, Article number: 3580 (2014)
23. Yongqiang Li, Lianchun Zhu, Yao Liu, Yujie Wei, Yanxin Wu, Di Tang, Zhenli Mi. On the strain hardening and texture evolution in high manganese steels: Experiments and numerical investigation[J]. Journal of the Mechanics and Physics of Solids, 2013, 61(12):2588-2604.
2. Zhou D, Xu M, Mi Z. Energy Absorption Mechanism of High-Strength Q&P and DP Steel Thin-Walled Structures[J]. Transactions of the Indian Institute of Metals, 2020, 73(7): 1999-2006.
3. Zhou D, Li M, Mi Z, et al. Investigation of Selective Oxidation and Reaction Wetting of Q&P Steel Under Different Dew Point During Continuous Galvanizing[J]. Transactions of the Indian Institute of Metals, 1-8.
4. Zhou D, Li M, Mi Z, et al. Insight into the law and mechanism of selective oxidation of Q&P steel under different annealing parameters[J]. Materials Research Express, 2020, 7(10): 106524.
5. Duan X, Jiang H, Mi Z, et al. Reduce the Planar Anisotropy of AA6016 Aluminum Sheets by Texture and Microstructure Control[J]. Crystals, 2020, 10(11): 1027.
6. Wang J, Mi Z, Jiang H, et al. Texture-governed electrochemical corrosion behaviour of AA 6082 alloy[J]. Journal of Materials Science, 2019, 54(8): 6608-6623.
7. Wang J Y, Jiang H T, Duan X G, Lin H T, Qiu P, Mi Z L. Orientation and microstructure topology governed crack propagation behavior in AA7021 aluminum alloys during uniaxial tension[J]. Materials Science and Engineering: A, 2019, 739: 254-263.
8. Duan X, Mi Z, Jiang H, et al. Rapid bake-hardening response of Al-Mg-Si alloy during two-stage pre-aging heat treatment[J]. Materials Research Express, 2019.
9. Xu M, Li H, Jiang R, Jiang H, Mi Z. Deformation behavior and microstructural evolution in ultra-high-strength dual-phase (UHS-DP1000) steel with different strain rates[J]. Journal of Iron and Steel Research International, 2019, 26(2): 173-181.
10. Yu Z C, Mi Z L, Guo J, et al. Studying inhomogeneous deformation of bainite-retained austenite steel during cold drawing[J]. Materials Research Express, 2018, 5(9): 096518.
11. Yang Y G, Mi Z L, Xu M, et al. Impact of intercritical annealing temperature and strain state on mechanical stability of retained austenite in medium Mn steel[J]. Materials Science and Engineering: A, 2018, 725: 389-397.
12. Yang Y G, Mi Z L, Xu M, Jiang H T, Xiu Q. Bending deformation and fracture characterisation in quenching and partitioning steel[J]. Materials Science and Technology, 2018: 1-9.
13. Yang Y, Mi Z, Liu S, et al. The Impact of Strain Heterogeneity and Transformation of Metastable Austenite on Springback Behavior in Quenching and Partitioning Steel[J]. Metals, 2018, 8(6): 432.
14. Yang Y G, Mi Z L, Li H, Xu Mei, Jiang R T. Effects of Shear Strain on Orientation Gradients, the Instability of Austenite Diffraction Peak, and Microstructure in Twinning-Induced Plasticity (TWIP) Steels[J]. Steel research international, 2018,89(2):1-8.
15. Xu M, Mi Z L, Li H, Tang D, Jiang H T. Deformation mechanism transition in Fe–17Mn–0.4 C–0.06 V TWIP steel with different strain rates[J]. Materials Science and Technology, 2018,34(2):242-251.
16. Li L, Mi Z L, Wang Z, et al. Modified quenching temperature selection method for partial austenitization quenching and partitioning steel[J]. Materials Research Express, 2018, 5(6): 066553.
17. Yu Z C, Mi Z L, Cai Q W, et al. Effect of Final Rapid Cooling Temperature on Ultra-Fine Carbides of Ti-Mo Ferrite Matrix Microalloyed Steel[C]//Materials Science Forum. Trans Tech Publications, 2018, 926: 3-10.
18. Li H, Xu M, Li Z, Jiang R, Jiang H, Li L, Mi Z. Hot deformation behaviour and processing map of a typical Fe-Mn-Si-Cr steel for automotive body structures[J]. Ironmaking & Steelmaking, 2018, 45(10): 937-943.
19. Li H, Xu M, Li Z T, Jiang R T, Jiang H T, Li Long, Mi Z L. Hot deformation behaviour and processing map of a typical Fe-Mn-Si-Cr steel for automotive body structures[J]. Ironmaking & Steelmaking, 2017: 1-7.
20. Xu M, Yang Y G, Chen J Y, Tang D, Jiang H T, Mi Z L. Effects of strain states on stability of retained austenite in medium Mn steels[J]. Journal of Iron and Steel Research, International, 2017, 24(11): 1125-1130.
21. Li Hui, Mi Zhenli, Zhang Xiaolei, Tang Di, Wang Yide. Carbide Dissolution during Intercritical Austenitization in Bearing Steel[J]. Journal of Wuhan University of Technology(Materials Science Edition),2014,06:1242-1245.
22. Yujie Wei；Yongqiang Li；Lianchun Zhu；Yao Liu；Xianqi Lei；Gang Wang；Yanxin Wu；Zhenli Mi；Jiabin Liu；Hongtao Wang；Huajian Gao； Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins；Nature Communications volume 5, Article number: 3580 (2014)
23. Yongqiang Li, Lianchun Zhu, Yao Liu, Yujie Wei, Yanxin Wu, Di Tang, Zhenli Mi. On the strain hardening and texture evolution in high manganese steels: Experiments and numerical investigation[J]. Journal of the Mechanics and Physics of Solids, 2013, 61(12):2588-2604.
获奖
河北省科学技术进步一等奖（2016），排名第二
邯郸市科学技术一等奖（2016），排名第二
冶金科学技术三等奖（2011），排名第一
邯郸市科学技术一等奖（2016），排名第二
冶金科学技术三等奖（2011），排名第一
专利
近五年的授权发明专利：
1.米振莉，汪振，苏岚，吴彦欣，胡水平，张勇军；一种高强钢非闭口件的高温气压胀形装置，ZL201910154227.4，2019-03-01
2.米振莉，罗翔，吴彦欣，李会健，张彭磊，彭飞，张迪；一种汽车用冷轧低合金高强度空冷强化钢及制备方法[P]. 北京：CN109972058B,2019-03-28
3.米振莉，汪振，吴彦欣，胡水平，郭锦，杨永刚，张勇军；一种高强钢非闭口件的组织性能一体化调控性能及工艺，CN209821957B,2019-03-28
4.米振莉，罗翔，吴彦欣，江海涛；一种热气胀成型用空冷强化钢及其制备方法[P]. 北京：CN109881093B,2019-03-01.
5.米振莉，徐梅，李龙，杨永刚，江海涛，蒋睿婷，汪振；一种低成本高强塑型高锰TWIP/TRIP效应共生钢及其制备方法[P]. 北京：CN107574376A,2018-01-12.
6.米振莉，徐梅，李龙，杨永刚，江海涛，蒋睿婷，汪振；一种基于纳米结构的高吸能型高锰TWIP钢及其制备方法[P]. 北京：CN107574377A,2018-01-12.
7.米振莉，张小垒，李辉，李志超；一种GCr15高碳铬轴承钢在线快速球化退火工艺[P]. 北京：CN104328259A,2015-02-04.
1.米振莉，汪振，苏岚，吴彦欣，胡水平，张勇军；一种高强钢非闭口件的高温气压胀形装置，ZL201910154227.4，2019-03-01
2.米振莉，罗翔，吴彦欣，李会健，张彭磊，彭飞，张迪；一种汽车用冷轧低合金高强度空冷强化钢及制备方法[P]. 北京：CN109972058B,2019-03-28
3.米振莉，汪振，吴彦欣，胡水平，郭锦，杨永刚，张勇军；一种高强钢非闭口件的组织性能一体化调控性能及工艺，CN209821957B,2019-03-28
4.米振莉，罗翔，吴彦欣，江海涛；一种热气胀成型用空冷强化钢及其制备方法[P]. 北京：CN109881093B,2019-03-01.
5.米振莉，徐梅，李龙，杨永刚，江海涛，蒋睿婷，汪振；一种低成本高强塑型高锰TWIP/TRIP效应共生钢及其制备方法[P]. 北京：CN107574376A,2018-01-12.
6.米振莉，徐梅，李龙，杨永刚，江海涛，蒋睿婷，汪振；一种基于纳米结构的高吸能型高锰TWIP钢及其制备方法[P]. 北京：CN107574377A,2018-01-12.
7.米振莉，张小垒，李辉，李志超；一种GCr15高碳铬轴承钢在线快速球化退火工艺[P]. 北京：CN104328259A,2015-02-04.
科研项目
近五年主持并参与的主要科研项目
纵向项目
1.国家重点研发计划：“高性能超高强汽车用钢的新型先进成型技术开发与应用示范”2017-2021
2.中央高校基本业务费：“高品质交通及能源用特殊钢的研究与开发”2017-2018
3.国家工信部智能制造示范类：“高端线材全流程智能制造新模式应用”2017-2020
4.山东省重点研发计划“超高强韧汽车用钢的关键制造技术及产业化应用”2019-2022
5.北京市教委共建项目：“绿色高性能汽车钢研制与应用研究”2020-2023
横向项目
1.河北钢铁股份有限公司邯郸分公司：“新一代汽车用钢生产工艺技术开发”，2015
2.安阳钢铁股份有限公司：“高品质冷轧家电与汽车用钢板研究与开发”，2016
3.中铝瑞闽股份有限公司：“基于材料基因工程研发汽车板用6XXX系铝合金”，2018
4.江苏沙钢集团有限公司：“高端线材全流程工艺过程数字化仿真系统”，2018
5.娄底华菱薄板产业园开发建设有限公司：“娄底华菱薄板产业园发展规划”，2019
6.河钢股份有限公司邯郸分公司：“超高强汽车板成形失效特性相关研究”，2019
7.宝钢集团南通线材制品有限公司：“锌铝镁镀层钢丝开发与技术研究”，2019
8.宝山钢铁股份有限公司“BSCCR流程QP、CP、MS钢组织演变规律及对性能的影响机理研究”，2020
9.宝山钢铁股份有限公司“BSCCR铁素体轧制专业化产线数值模拟平台开发与组织性能调控机理研究”，2020
纵向项目
1.国家重点研发计划：“高性能超高强汽车用钢的新型先进成型技术开发与应用示范”2017-2021
2.中央高校基本业务费：“高品质交通及能源用特殊钢的研究与开发”2017-2018
3.国家工信部智能制造示范类：“高端线材全流程智能制造新模式应用”2017-2020
4.山东省重点研发计划“超高强韧汽车用钢的关键制造技术及产业化应用”2019-2022
5.北京市教委共建项目：“绿色高性能汽车钢研制与应用研究”2020-2023
横向项目
1.河北钢铁股份有限公司邯郸分公司：“新一代汽车用钢生产工艺技术开发”，2015
2.安阳钢铁股份有限公司：“高品质冷轧家电与汽车用钢板研究与开发”，2016
3.中铝瑞闽股份有限公司：“基于材料基因工程研发汽车板用6XXX系铝合金”，2018
4.江苏沙钢集团有限公司：“高端线材全流程工艺过程数字化仿真系统”，2018
5.娄底华菱薄板产业园开发建设有限公司：“娄底华菱薄板产业园发展规划”，2019
6.河钢股份有限公司邯郸分公司：“超高强汽车板成形失效特性相关研究”，2019
7.宝钢集团南通线材制品有限公司：“锌铝镁镀层钢丝开发与技术研究”，2019
8.宝山钢铁股份有限公司“BSCCR流程QP、CP、MS钢组织演变规律及对性能的影响机理研究”，2020
9.宝山钢铁股份有限公司“BSCCR铁素体轧制专业化产线数值模拟平台开发与组织性能调控机理研究”，2020